My Cart

Close

FREE SHIPPING ON ALL PURCHASES OVER $40

Spartan Armor Systems

AR550 BODY ARMOR SHOOTERS CUT AND SPARTAN PLATE CARRIER ENTRY LEVEL PACKAGE

Sold Out

PRODUCT DETAILS

SPARTAN ARMOR SYSTEMS® "SPARTAN" SHOOTERS CUT PLATE CARRIER

 

Product Overview

The Spartan Armor Systems® "Spartan" Plate Carrier is true to its name: sleek, minimalist, and highly capable on the battlefield. Designed to be lightweight, agile, and to enable the wearer to rapidly engage, the Spartan Armor Systems® “Spartan” Shooters Cut Plate Carrier is designed for use with our shooters cut steel core armor: Spartan™ Omega™ AR500 and AR550. Adjustable from Medium to XL, this carrier fits 10”x12” shooters cut plates and will accommodate 6”x6” side plates in the cummerbund. The Spartan Shooters Cut Plate Carrier is built to last and gives you the key essential features you need without sacrificing quality. The Spartan Shooters Cut Carrier is a great entry-level carrier that offers a variety of features at an affordable price point. When the situation dictates less is more, this carrier delivers the goods where it counts. 

 

Spartan Armor Systems® Spartan Shooters Cut Plate Carrier Specs:

  • Lightweight Plate Carrier That Accepts Side Plates
  • Designed For Spartan Armor Systems® 10” X 12” Shooters Cut Steel Core Plates
  • Adjustable From Medium To XL
  • PALS Webbing On Front And Back For Versatility And Customization
  • Velcro On Front And Back For Id Patch Placement
  • Cummerbund Is Designed To Hold 6” X 6” Side Plates Comfortably
  • Shoulder Pads Included
  • 860 Denier Poly Construction
  • Reinforced Drag Handle

 

SPARTAN ARMOR SYSTEMS® AR550 BODY ARMOR SET OF TWO

 

Product Overview

Spartan Armor Systems® has literally taken Level III-rated body armor to the next level by adding a 10% increase in ballistic core hardness to their AR550 line of armor. Because of this enhancement, our AR550 level III+ body armor offers operators advanced rifle-rated threat protection and has been special threat validated in an independent NIJ credentialed laboratory. Manufactured and tested within the highest quality standards, utilizing laboratory-certified steel, our single curve, full coat AR550 plates have received NIJ Certification under NIJ 0101.06 level III specifications. For added peace of mind, every plate of armor sold by Spartan Armor Systems® is serialized allowing it to be easily tracked back to the original plate of steel it was cut from should there be any question as to its ballistic properties.

NIJ Certified

Protective Value Added 

We understand the NIJ rating system can be confusing. Simply put, our AR550 body armor is certified as NIJ (National Institute of Justice) level III rated but has undergone special threat testing to achieve a level III+ rating. AR550 Single Curve, Full Coat body armor plates are labeled as level III on the back of the plate as the National Institute of Justice (NIJ) does not currently have a level III+ rating. “Level III+” indicates that special threat testing was created within the body armor industry to fill the void between NIJ 0101.06 level III and NIJ level IV, specifically to account for high-velocity penetrator rounds such as M855 (aka green tips). While AR550 single curve full coat plates are certified as NIJ level III, rest assured they are made from AR550 ballistic grade steel and have been special threat tested to attain the level III+ qualification. Quite simply, the NIJ requires that we label Spartan Armor Systems® AR550 Single Curve Full Coat Plates as “Level III” even though they are capable of providing the operator with a higher degree of ballistic protection. 

 

Battle Hardened

Our AR550 armor hits the “sweet spot” in the Brinell Hardness (BHN) range. With a core hardness of approximately 545-560 BHN, we have found that the ballistically rated variant of AR550 that we use when manufacturing our AR550 armor is perfect for defeating higher velocity threats, while not exposing the armor plate to extreme stress due to forming.

Our AR550 Level III+ armor has our GEN2 lower cut radius, it’s much harder than AR500, but not so hard that it risks incurring severe stress while undergoing the formation process.

 

Laser Cut to Protect Ballistic Integrity

All steel core body armor is cut and shaped after the ballistic properties have been formulated within the steel. While other steel body armor manufacturers commonly use plasma torch cutting that applies excessive heat (25,000 ˚C / 45,000 ˚F) to a wide portion of the steel plate, Spartan Armor Systems® only utilizes laser cutting in order to protect the ballistic integrity of each steel core body armor plate we manufacture. Plasma cutting also requires grinding to clean up the edges after the fact, resulting in increased heat and possible fatigue. At Spartan Armor Systems®, we maintain the highest production integrity and quality standards every step of the way for our customers because we know what is at stake. 

  

IMPORTANT NOTE: The base coat option only provides protection against corrosion and offers little to no fragmentation/spall mitigation. Should you choose to select base coat plates, please consider adding our Spall Containment Sleeve (sold separately) as a means of fragmentation mitigation.

 

Blazing The Trail of Innovation

Our AR550 Spartan Body Armor now offers operators the option of coming with the Advanced Triple Curve (ATC) feature. This is an industry FIRST! Spartan Armor Systems®™ is proud to be the LEADER in the industry when it comes to offering our customers triple-curved AR550 body armor. With higher velocity rifle threats commonly present throughout the United States, we’ve developed this AR550 armor to specifically defeat some common threats such as 5.56 x 45 XM193, 5.56 x 45 M855 /SS109, and 7.62 x 51 (.308 Winchester) at a rated velocity of 3,100 fps or less. Additionally, we’ve successfully defeated these threat profiles from Close Quarters Battle (CQB) distances…repeatedly!

Configuration: This armor comes as a pair, meaning you will receive both front and back plates.

 

Shooters Cut Plate Weight (per plate):.

  • 10”x12” AR550 Shooters Cut: Base Coat 8lbs 1oz.

Thickness: .25″

 

Side Plate Weight (per plate):    

6×6 approximately 2lbs 9oz (base coat)

 

AR550 Body Armor - Shooters Cut Specs:

  • Made in U.S.A.
  • Special Threat Tested to Level III+ Standards
  • Single Curve Base Coat Model is NIJ Certified Level III, But Provides Level III+ Protection
  • Available in Single Curve (commonly Called "MultiCurve" by other manufacturers) or Advanced Triple Curve™ 
  • Full Coat Option Provides Fragmentation/Spall Mitigation, Base Coat Provides Corrosion Protection Only